|
 Features
 |
Automated loss measurements for three wavelengths |
|
Auto wavelength recognition |
|
Universal fibre optic power meter and light source adapters
FC/ST and SC |
|
Fibre Optic Power Meter with 75 dB dynamic range |
|
Stable single port triple wavelength laser |
|
Storage for 200 triple wavelength loss measurements |
|
Rechargeable Li polymer 9V battery |
|
USB interface with free PC application software |
The 1500 Series Fibre Optic Power Meters and Light
Sources are indispensable tools for fibre installation and maintenance.
The Fibre Optic Power Meter measures optical power and,
when paired with the LS-1500 Series Light Sources, it will perform automatic
loss measurements with wavelength recognition for up to three laser
wavelengths.
Pressing the 'store loss button' records all three
measurements for later downloading and analysis via its USB port.
It stores up to 2000 triple wavelength loss
measurements. The LTS-1500 Fibre Optic Power Meter greatly simplifies and
expedites measurements of fiber optic links.
It incorporates a highly sensitive and stable InGaAs
detector with six calibrated wavelengths that provide a measurement range of +5
to -75 dBm.
A high powered version is available for CATV
applications.
All fibre optic power meters and lights sources are
equipped with universal adapters and are shipped with FC, ST and SC
fittings.
They are powered by a rechargeable Lithium Polymer
battery and in an emergency can be powered by a standard 9V alkaline.
The universal power adapter/charger is supplied with
four interchangeable plugs.
Fibre Optic Power Meter Specifications
|
Fibre Optic Power Meter Detector Type:
Indium-Gallium-Arsenide |
|
Calibrated Wavelengths: 850, 1300, 1310, 1490, 1550, 1625
nm |
|
Units of Measurement: dBm, dB, 0.01 db resolution |
|
Display Update Rate: Six times per second |
|
Power Input Range: +5 dBm to - 77 dBm |
|
Power Measurement Uncertainty: ± 0.18 dB under
reference conditions, ± 0.25 dB from 0 to -65 dBm, ± 0.35 dB from
0 to +5 dBm and from -65 to -77 dBm |
|
Autotest Measurement Rate: Four seconds per
wavelength |
|
Autotest Range: 0 to - 36 dB |
|
Storage Locations: 2000 |
|
Battery Supplied: Rechargeable Li Polymer |
|
Operating Time: Approximately twenty hours following a full
charge |
|
Power Supply/Charger Provided: Wall Mount, Universal, US,
UK. Continental Europe, and Australian Plugs Included |
|
Power Requirements: 95-260 VAC, 50-60 Hz, 3 VA Max |
|
Operating Temperature Range: -10 to 45ºC |
|
Dimensions (mm): 150 L x 100 W x 35 H (with rubber
boot) |
|
Weight: 0.52 kg |
|
Accessories Provided: FC, ST, SC adaptors for both source
and power meter, rubber boot, Battery, Battery, Power supply/charger, manual,
USB Cable, PC application software |
|
Standard Warranty: Two years, Components and Workmanship,
30 Day Satisfaction Guarantee |
Light Source Specifications
|
Laser source output power: 0dBm, 1 mW |
|
Output stability: +/- 0.05 dB / 24 hr @constant temperature,
+/- 0.02 dB/C temperature coefficient |
|
Laser wavelengths provided: 850 nm, 1300 nm, 1310 +/- 20 nm,
1490 +/- 20 nm, 1550 +/- 20 nm |
|
Modulation modes: CW, 270 Hz, 1000 Hz, 2000 hz |
|
Autotest measurement rate: Four seconds per
wavelength |
|
Laser safety classification: Class 1 safety per FDA/CDRH and
IEC-825-1 regulation |
|
Battery: Rechargeable Li polymer |
|
Operating time: Approx. 15 hr following full
charge |
|
Power supply/charger: Wall mount, Universal. US, UK,
Continental Europe, and Australian plugs included |
|
Power Requirements: 95-260 VAC, 50-60 Hz, 3 VA Max |
|
Operating Temperature Range: -10 to 45ºC |
|
Dimensions (mm): 150 L x 100 W x 35 H (with rubber
boot) |
|
Weight: 0.52 kg |
|
Accessories Provided: FC, ST, SC adaptors, rubber boot,
Battery, Battery Power supply/charger, manual |
|
Standard Warranty: Two years, Components and Workmanship,
30 Day Satisfaction Guarantee |
|
