|
 Features
 |
Large Area InGaAs detector |
|
800 MHz Analog Bandwidth |
|
Selectable Gain Settings |
|
Universal Power Supply |
|
Capability to drive 50 Ohm output loads |
|
For use for Single or Multi Mode Fibers |
Applications
|
General laboratory testing of optical components |
|
Field Service Testing and Troubleshooting |
|
Laser alignment and tuning |
|
Plasma physics measurements |
The TIA-952 optical receiver is a convenient, easy to
use O/E converter. It is extremely useful in a variety of laboratory, factory
and field service situations where a quick check of the operation of a laser
source, optical transmitter or the throughput of a fiber optic communications
link is required. The unit conveniently mounts directly on the vertical input
BNC connector of your oscilloscope, digitizer or other readout device.
The large area Indium-Gallium-Arsenide detector
provided is optimized for use with both single mode and multi mode fibers and
covers the 900 to 1700 nm spectral region. Gains are switch selectable and
provide peak responsivity values of approximately 500 and 2500 volts per watt.
The electrical bandwidth of the TIA-952 exceeds 800 MHz using the low gain
setting and exceeds 300 MHz in the high gain mode.
The unit's output stage is fully capable of driving a
50 ohm coaxial cable terminated in its characteristic impedance. Fiber
connector options include either ST or FC receptacles. Powered by a universal
wall mount power supply (90 - 260 VAC, 50-60 Hz with four mains adaptors), the
TIA-952 is handy to use and store.
The ease of use and convienience of this instrument are
matched only by the high performance-to-price ratio that is typical of products
from Terahertz Technologies. It is also backed by our standard two year
warranty and guarantee of satisfaction.
|
