A range of broadband IR sources is distributed by Scitec
Instruments. These sources operate through the heating of an element so that it
emits in the infra-red range. As these devices are broadband, some energy is
released at visible wavelengths making them glow.
IR-1X Series
|
10 to 11W wire wound parts suitable for use as steady state
sources. Available with different reflectors and windows. Reaching temperatures of (975 °C) |
IR-2X Series
|
4.0 W emitters wire wound parts suitable for use as steady state
sources. Available with different reflectors and windows. Reaching temperatures of (900 °C) |
IR-3X Series
|
4.2 W wire wound IR source mounted on a
TO-5 header, suitable for use in laboratory or field. Reaching temperatures of (950 °C) |
IR-4X Series
|
1.3 to 2.5 W thin film sources suitable for steady state. Available with different reflectors and windows. Reaching temperatures of (600 °C) |
IR-SiX Series
|
20 to 70 W the IR-Si series are designed for those customers who require higher temperatures and greater output from their infrared source. Available with different reflectors and windows. Reaching temperatures of (1385 °C) |
IR-5X,7X&8X
|
200 to 690 mW thin film source suitable for high speed
pulsing . Available with different windows. Reaching temperatures of (700 °C) |
EP Series
|
2.4 to 10.5 W thin film source suitable for high speed
pulsing & steady state applications. Available with different windows. Reaching temperatures of (1725 °C) |
EF Series
|
2.6 to 4.4 W thin film source suitable for high speed
pulsing. Available with different windows. Reaching temperatures of (700 °C) |
EK Series
|
1.3 to 8.4 W thin film source suitable for steady state applications. Available with different windows. Reaching temperatures of (1050 °C) |
Thermo- couple
System
|
Type K thermocouple and digital readout |