Model: SDL-1342-XXXXT

Output Power: 3000-5000mW

Wavelength: 1342nm

Operation Mode: CW, near TEM₀₀

Power Stability (rms, over 4 hours): <5% (over 2 hours)

Warm up time: <15 minutes

M² factor: <2.0

Beam Divergence (1/e² full Angle): <2.0 mrad

Beam Diameter (at aperture): ~5.0mm

Beam height from base: 144.0mm

Spectral Linewidth: <0.1nm

Polarisation ratio: >100:1

Noise of amplitude, rms: <1%

Operating Temperature: 10°C~35°C

Dimensions of laser head: 430 (L) × 125 (W) × 180 (H)

Power supply: SDL-PS-800

Dimension of power supply: 430 (L) × 365 (W) × 180 (H)

SDL-1342-XXXXT

1342 nm Infra Red DPSS Laser with TEC. Replace XXXX with the required Output Power in mW. See table below for available options.

Output Power (XXXX)

3000: 3 W

4000: 4 W

5000: 5 W

Other laser output powers may be available. Please contact us with your requirements.