Features
The RADIKON is the brand new replacement for the
RADIKON junior.
The RADIKON is used to control the value generated by a
detector (e.g. radiation sensor or a pressure sensor). If the detector value
falls below a certain setpoint value a relay is activated where a valve, an
alarm buzzer or other modules can be connected.
The highlight of the RADIKON is its high versatility
making the module very interesting to industrial developers who need to match
the controller with different input signals. The RADIKON can read the generic
current of a photodiode (5nA < ISensor < 5µA) as well as 0...x Volt
and 0(4)
.20mA probe signals. The value x is user definable.
The RADIKON outputs a voltage of 0
.10V which can
be used to attach a separate display or to connect the RADIKON with a PID
controller. A multicolour LED changes its colour with the radiation intensity
level. In addition to these features, the easy set up and configuration make
the RADIKON a perfect tool for developers or manufacturers of small series. For
medium series controller modules with customised properties are
offered.
Specifications
|
Input values |
Output values |
|
Type: |
Values: |
Type: |
Properties: |
|
Generic sensor signal, e.g. photodiode current
|
0
..x nA x can be configured (with jumpers) to
50nA, 150nA, 500nA, 1,5µA and 5µA, other values are possible by
soldering a feedback resistor |
Relay
|
free floating, 250VAC, 2A |
|
Voltage input
|
0
..x Volt x can be configured (with jumpers) to
50mV, 142mV, 450mV, 1160mV, 2500mV and 10V other values are possible by
soldering a feedback resistor |
Voltage Output
|
0
.10V |
|
Current input (current loop)
|
y
20 mA y can be configured (with jumpers) to 0mA
or 4mA |
Multi colour LED
|
"green" = Value OK "blue" = Value critical "red" =
Value too low |
|
Adjustable setpoints
|
relay set pointmulti colour LED |
Relay
|
status of the relay, warmup delay, activity |
|
Other properties: |
|
Inputs
|
DC-isolated, EMC and EDS conform |
Dimensions and weight
|
BxHxT = 22.5 x 99 x 114.5 mm (top hat rail EN 50022),
m=72g |
|
Power supply
|
12
.24VDC |
Conformities
|
ROHS, CE |
Please see the datasheet for more
information. |