 |
SG01S-18 /UV Broadband
|
SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing - 0.06 mm2 detector area. PTB tested high chip stability.
10mW/cm2 peak radiation results a current of approx. 780nA. |
| |
|
|
|
SG01S-18S /UV Broadband |
SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing, short carp- 0.06 mm2 detector area.
10mW/cm2 peak radiation results a current of approx. 400nA |
| |
|
|
|
SG01S-18ISO90/UV Broadband |
SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing, both pins isolated in a circle - 0.06 mm2 detector area.
10 mW/cm2 peak radiation results a current of approx. 400 nA |
| |
|
|
|
SG01S-5 /UV Broadband |
SiC UV Broadband Photodiode with large TO5 hermetically sealed metal housing - 0.06 mm2 detector area.
10 mW/cm2 peak radiation results a current of approx. 400 nA |
| |
|
|
|
SG01M-18 /UV Broadband |
SiC UV Broadband Photodiode with flat TO18 hermetically sealed metal housing - 0.2 mm2 detector area.
10 mW/cm2 peak radiation results a current of approx. 2600 nA |
| |
|
|
|
SG01M-18S /UV Broadband |
SiC UV Broadband Photodiode with flat TO18 hermetically sealed metal housing, short cap - 0.2 mm2 detector area.
10 mW/cm2 peak radiation results a current of approx. 2000 nA |
| |
|
|
|
SG01M-18ISO90 /UV Broadband |
SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing, both pins isolated in a circle - 0.2 mm2 detector area.
10 mW/cm2 peak radiation results a current of approx. 2.6 μA |
| |
|
|
|
SG01M-5Lens /UV Broadband |
SiC UV Broadband Photodiode with TO5 housing with concentrating lens (11 mm2 virtual detector area) - 0.2 mm2 detector area.
For very weak radiation. 10 μW/cm2 radiation at peak results a current of approx. 140 nA |
| |
|
|
|
SG01D-18 /UV Broadband |
SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing - 0.5 mm2 detector area. PTB tested high chip stability.
10 μ/cm2 peak radiation results a current of approx. 6.5 nA |
| |
|
|
|
SG01L-18 /UV Broadband |
SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing - 1.0 mm2 detector area.
10 μW/cm2 peak radiation results a current of approx. 12 nA |
| |
|
|
|
SG01L-18S /UV Broadband |
SiC UV Broadband Photodiode with flat TO18 hermetically sealed metal housing, short cap- 1.0 mm2 detector area.
10 μW/cm2 peak radiation results a current of approx. 12 nA |
| |
|
|
|
SG01L-18ISO90 /UV Broadband |
SiC UV Broadband Photodiode with TO18 hermetically sealed metal housing, two isolated pins in a circle- 1.0 mm2 detector area.
10 μW/cm2 peak radiation results a current of approx. 12 nA |
| |
|
|
|
SG01L-5 /UV Broadband |
SiC UV Broadband Photodiode with TO5 hermetically sealed metal housing - 1.0 mm2 detector area.
10 μW/cm2 peak radiation results a current of approx. 12 nA |
| |
|
|
|
SG01XL-5 /UV Broadband |
SiC UV Broadband Photodiode with TO5 hermetically sealed metal housing - 4.0 mm2 detector area.
1 μW/cm2 peak radiation results a current of approx. 5 nA |
| |
|
|
|
SG01XL-5ISO90 /UV Broadband |
SiC UV Broadband Photodiode with TO5 hermetically sealed metal housing, two isolated pins in a circle - 4.0 mm2 detector area.
1 μW/cm2 peak radiation results a current of approx. 5 nA |
|
SG01S-A18 |
UVA-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.06 mm2 active detector area. PTB tested high chip stability.
10 mW/cm2 radiation at 335nm results a current of approx. 360 nA. |
| |
|
|
|
SG01M-A18 |
UVA-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.2 mm2 active detector area. PTB tested high chip stability.
10 μmW/cm2 radiation at 335 nm results a current of approx.1.2 nA |
| |
|
|
|
SG01M-A5 |
UVA-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 0.2 mm2 active detector area.
10 mW/cm2 radiation at 335nm results a current of approx. 1.6 μA |
| |
|
|
|
SG01D-A18 |
UVA-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.5 mm2 active detector area. PTB tested high chip stability.
10 μmW/cm2 radiation at 335 nm results a current of approx. 3 nA |
| |
|
|
|
SG01L-A5 |
UVA-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 1.0 mm2 active detector area.
10 μW/cm2 radiation at 335nm results a current of approx. 7 nA |
| |
|
|
|
SG01L-A18 |
UVA-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 1.0 mm2 active detector area. PTB tested high chip stability.
10 μmW/cm2 radiation at 335nm results a current of approx. 6 nA |
| |
|
|
|
SG01XL-A5 |
UVA-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 4.0 mm2 active detector area.
1 μW/cm2 radiation at 335nm results a current of approx. 3 nA |
|
SG01S-B18 |
UVB-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.06 mm2 active detector area. PTB tested high chip stability.
10 mW/cm2 radiation at peak results a current of approx. 350 nA |
| |
|
|
|
SG01M-B18 |
UVB-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.2 mm2 active detector area. PTB tested high chip stability.
10 μW/cm2 radiation at peak results a current of approx. 1.2 nA |
| |
|
|
|
SG01M-B5 |
UVB-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 0.2 mm2 active detector area.
10 mW/cm2 radiation at 280 nm results a current of approx. 2.3 μA |
| |
|
|
|
SG01D-B18 |
UVB-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.5 mm2 active detector area. PTB tested high chip stability.
10 μW/cm2 radiation at peak results a current of approx. 2.9 nA |
| |
|
|
|
SG01L-B5 |
UVB-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 1.0 mm2 active detector area.
10 μW/cm2 radiation at 280 nm results a current of approx. 10 nA |
| |
|
|
|
SG01L-B18 |
UVB-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 1.0 mm2 active detector area. PTB tested high chip stability.
10 μW/cm2 radiation at peak results a current of approx. 5.8 nA |
| |
|
|
|
SG01XL-B5 |
UVB-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 4.0 mm2 active detector area.
1 μW/cm2 radiation at 280 nm results a current of approx. 4 nA |
|
SG01S-C18 |
UVC-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.06 mm2 active detector area. PTB tested high chip stability.
10 mW/cm2 radiation at 254 nm results a current of approx. 315 nA |
| |
|
|
|
SG01S-C5 |
UVC-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 0.06 mm2 active detector area.
10 mW/cm2 radiation at 254 nm results a current of approx. 210 nA |
| |
|
|
|
SG01M-C5 |
UVC-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 0.2 mm2 active detector area.
10 mW/cm2 radiation at 254 nm results a current of approx. 1.5 μA |
| |
|
|
|
SG01D-C18 |
UVC-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 0.5 mm2 active detector area. PTB tested high chip stability.
10 μW/cm2 radiation at 254 nm results a current of approx. 2.6 nA |
| |
|
|
|
SG01L-C5 |
UVC-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 1.0 mm2 active detector area.
10 μW/cm2 radiation at 254 nm results a current of approx. 6.2 nA |
| |
|
|
|
SG01L-C18 |
UVC-only sensitivity Photodiode with TO18 hermetically sealed metal housing - 1.0 mm2 active detector area. PTB tested high chip stability.
10 μW/cm2 radiation at 254 nm results a current of approx. 5.2 nA |
| |
|
|
|
SG01XL-C5 |
UVC-only sensitivity Photodiode with TO5 hermetically sealed metal housing - 4.0 mm2 active detector area.
1 μW/cm2 radiation at 254 nm results a current of approx. 2.6 nA |
|
SG01M-E18
(eryca-customs) |
UV-Index Photodiode with TO18 hermetically sealed housing
1 UVI (2,5 μW/cm2) ≈ 500 pA
0.2 mm2 detector area |
| |
|
|
|
SG01D-E18
(eryca-customs) |
UV-Index Photodiode with TO18 hermetically sealed housing
1 UVI (2,5 μW/cm2) ≈ 1,25 nA
0.5 mm2 detector area |
| |
|
|
|
SG01L-E5
(eryca-advanced) |
UV-Index Photodiode with TO5 housing
1 UVI (2,5 μW/cm2) ≈ 2 nA, cosine correction
1.00 mm2 detector area |
| |
|
|
|
SG01XL-E5
(eryca-science) |
UV-Index Photodiode with TO5 housing
1 UVI (2,5 μW/cm2) ≈ 8 nA, cosine correction
4.00 mm2 detector area |
UV sensor selection guide