|
Features
Probes from the UV-Cosine series are characterised by a special
housing with wide angle characteristics (cosine correction). The probes are
IP65 jet water resistant, have a soil resisting surface and are easy to
mount.
 |
For UVC measurements only, e.g. for purification control,
spectral sensitivity according to DVGW W294-3 |
|
Filtered silicon carbide (SiC) based UV detector for extreme
radiation hardness |
|
Special housing with wide angle characteristics |
|
IP65 jet water resistant housing |
|
Delivered with mounting set (locknuts and sealing
ring) |
The UV_Cosine_C series of probes is available in the following
five designs.
|
Part Number |
Description |
|
UV_Cosine_C_AMP4-20mA_cable |
With 4-20 mA output and 2 m cable |
|
UV_Cosine_C_AMP4-20mA_plug |
With 4-20 mA output and 5 pin connector |
|
UV_Cosine_C_AMP0-5V_cable |
With 0-5 V output and 2 m cable |
|
UV_Cosine_C_AMP0-5V_plug |
With 0-5 V output and 5 pin connector |
UV_Cosine_C_AMP4-20mA_cable
|
Integrated amplifier with 4-20 mA output |
|
Adjustable offset and amplification factor |
|
M20 x 1.5 thread for easy mounting |
|
2 m shielded cable |
UV_Cosine_C_AMP4-20mA_plug
|
Integrated amplifier with 4-20 mA output |
|
Adjustable offset and amplification factor |
|
M20 x 1.5 thread for easy mounting |
|
5 pin sensor connector (connection type Hirschmann ELKA
5012) |
|
Customised cable available |
UV_Cosine_C_AMP0-5V_cable
|
Integrated amplifier with 0-5 V output |
|
Adjustable offset and amplification factor |
|
M20 x 1.5 thread for easy mounting |
|
2 m shielded cable |
UV_Cosine_C_AMP0-5V_plug
|
Integrated amplifier with 0-5 V output |
|
Adjustable offset and amplification factor |
|
M20 x 1.5 thread for easy mounting |
|
5 pin sensor connector (connection type Hirschmann ELKA
5012) |
|
Customised cable available |
|
UV_Cosine_C_AMP4-20mA_cable