|
Features
Probes from the UV-DVGW series are designed to measure and monitor
irradiance levels in UV water purification facilities. The sensor fulfills the
latest rules of DVGW (W294 part 3, 2006). The probe is fitted with a Silicon
Carbide UV photodiode which guarantees extreme radiation hardness.
 |
For UVC measurements only, e.g. for purification control,
spectral sensitivity according to DVGW W294-3 |
|
Filtered silicon carbide (SiC) based UV detector for extreme
radiation hardness |
|
Stainless steel housing with 10 bar water pressure
resistance |
The UV_DVGW_C series of probes is available in the following five
designs.
|
Part Number |
Description |
|
UV_DVGW_C_AMP4-20mA_cable |
With 4-20 mA output and 2 m cable |
|
UV_DVGW_C_AMP4-20mA_plug |
With 4-20 mA output and 5 pin connector |
|
UV_DVGW_C_AMP0-5V_cable |
With 0-5 V output and 2 m cable |
|
UV_DVGW_C_AMP0-5V_plug |
With 0-5 V output and 5 pin connector |
UV_DVGW_C_AMP4-20mA_cable
|
Integrated amplifier with 4-20 mA output |
|
Adjustable offset and amplification factor |
|
2 m shielded cable |
UV_DVGW_C_AMP4-20mA_plug
|
Integrated amplifier with 4-20 mA output |
|
Adjustable offset and amplification factor |
|
5 pin sensor connector (connection type Hirschmann ELKA
5012) |
|
Customised cable available |
UV_DVGW_C_AMP0-5V_cable
|
Integrated amplifier with 0-5 V output |
|
Adjustable offset and amplification factor |
|
2 m shielded cable |
UV_DVGW_C_AMP0-5V_plug
|
Integrated amplifier with 0-5 V output |
|
Adjustable offset and amplification factor |
|
5 pin sensor connector (connection type Hirschmann ELKA
5012) |
|
Customised cable available |
|
UV_DVGW_C_AMP4-20mA_cable